do not coagulant, algaecide

Robotic pool cleaner Traditional sand tank system needs to put in the water coagulant, algaecide (CuSO4), which makes the residual ion concentration in the water is increasing, we must change the water often diluted concentration, wasting a lot of water. Automatic water treatment system using hydraulic prohibited coagulant, algaecide, effectively avoiding the problem of chemical contamination in water. Processed by the system, the water can continue using it, without changing the water every day, just add a small amount of the body away, the pool surface evaporation and equipment backwash water to the water quality has been reached. Saving a lot of water, reducing the daily operating costs, water savings can be achieved

Swimming pool, pool cleaning construction plan living

swimming pool automatic cleaner
(A): Cleaning time: according to the site to be.
(2): before cleaning preparations:
   1, the unit should be cleaned and filled with rooftop pool advance storage backup, promptly cut off the underground pool of water.
   2. Drain the pool as soon as possible, leaving the ground to a depth of 20-30 cm over the water.
   3, arrange 2 (electrical, hydraulic) work closely with the construction company.
   4. Prepare: (1) a ladder. (2) arrange three pumps wiring outlet. Pump (Submersible Pump): Model WQ18-15-1.1, 1.1 kilowatts of power, flow 8 m / h, head 15 meters, voltage 220V, insulation E, single Xiang motor current 2.5 Ann. (Pressure washer): Type QO × 6-18-1.3, 1.3 kilowatts of power, pressure 150 kg, voltage 220V, insulation Class A, single-phase motor current 8 Ann.
   5, ready to provide water, because the pool needs water repeatedly washed.
   6, before cleaning the side channel to check into the gas. Ensure no security risks for the operator.
   7, good security, not idlers near the pool, in order to ensure safe cleaning.
   8. Can water supply points.
(Three), Robotic pool cleaner cleaning process:
  1, arrange the cleaning staff of six people.
  2, clear bottom mud, debris.
  3. Drain the water.
  4, add water 20-30 cm.
  5, with high-pressure water wash the entire pool wall.
  6, again wash mud, dirty water thoroughly cleaned. Sludge disposed of in accordance with national regulations.
  7, into the water, wash the wall once again, at the end (repeatedly) drained.
  8, slightly dry with a 1:20 solution of chlorine dioxide disinfection comprehensive and held for 30 minutes.
  9, into the water and add disinfectant.
(Four), after cleaning the site inspection:
  1, sent on-site inspection.
  2, the pool of qualified testing by the health department (if necessary, at their own expense by the Party), the payment within a week.
(Five), the use of disinfectants: chlorine dioxide, as the pool wall, the bottom disinfection. Net water purification for water disinfection.