(A): Cleaning time: according to the site to be.
(2): before cleaning preparations:
1, the unit should be cleaned and filled with rooftop pool advance storage backup, promptly cut off the underground pool of water.
2. Drain the pool as soon as possible, leaving the ground to a depth of 20-30 cm over the water.
3, arrange 2 (electrical, hydraulic) work closely with the construction company.
4. Prepare: (1) a ladder. (2) arrange three pumps wiring outlet. Pump (Submersible Pump): Model WQ18-15-1.1, 1.1 kilowatts of power, flow 8 m / h, head 15 meters, voltage 220V, insulation E, single Xiang motor current 2.5 Ann. (Pressure washer): Type QO × 6-18-1.3, 1.3 kilowatts of power, pressure 150 kg, voltage 220V, insulation Class A, single-phase motor current 8 Ann.
5, ready to provide water, because the pool needs water repeatedly washed.
6, before cleaning the side channel to check into the gas. Ensure no security risks for the operator.
7, good security, not idlers near the pool, in order to ensure safe cleaning.
8. Can water supply points.
(Three), Robotic pool cleaner cleaning process:
1, arrange the cleaning staff of six people.
2, clear bottom mud, debris.
3. Drain the water.
4, add water 20-30 cm.
5, with high-pressure water wash the entire pool wall.
6, again wash mud, dirty water thoroughly cleaned. Sludge disposed of in accordance with national regulations.
7, into the water, wash the wall once again, at the end (repeatedly) drained.
8, slightly dry with a 1:20 solution of chlorine dioxide disinfection comprehensive and held for 30 minutes.
9, into the water and add disinfectant.
(Four), after cleaning the site inspection:
1, sent on-site inspection.
2, the pool of qualified testing by the health department (if necessary, at their own expense by the Party), the payment within a week.
(Five), the use of disinfectants: chlorine dioxide, as the pool wall, the bottom disinfection. Net water purification for water disinfection.
没有评论:
发表评论