pool cleaner Operating Instructions

1. Check the following components in place: pool rechargeable vacuum cleaners sewage suction head telescopic tube.
2. The vacuum can not play an open circle and a straight head sewage suction connection, and then telescopic rod connected to sewage suction head, hands and telescopic rod tubes Grab sewage suction head will slow
Slowly into the bottom.
3. Pushed to the edge of the pool pump inlet toward the direction of the smoke pollution to be put away, open hair filter lid, flak power,
4. After the vacuum tube into the bottom, starting from the surface of the tube on the water sent to the water slowly until the water tube until the last paragraph. Cover with the palm of the last paragraph of the vacuum (to prevent back flow of waterways), with a pump inlet connected.
5. After filled with water inside the hair filter, cover tightly, pressing the power switch. After the pump starts pumping of approximately 2-5 minutes, the water suddenly suddenly small the process is normal.
6. From the pool began work order cleaning, vacuuming process, slow movements need not too much force, excessive force will be the beginning of smoke pollution and dust floating head up, the impact of sewage suction effect.
7. After the completion of closed suction sewage pump, sewage suction head will empty out the water inside the vacuum, collect the remaining water, chopped power supply, sewage suction pump ventilation shady place out.